Walker Youtube Channel 3 years warranty

Walker DPF

WALKER DPF REGENERATION ADDITIVE is a combustion catalyst additive that optimizes the regeneration of diesel particle filters for diesel engine (DPF). Diesel engines (FAP). Thanks to its organometallic formula and its post-combustion action, this new generation additive reduces the combustion temperature of carbon soot and eliminates the particles that accumulate in the systems. WALKER DPF REGENERATION ADDITIVE is an economical product and the ideal alternative to OEM additives.

Advantages :

  • Cleans and removes particles from Diesel particle filters.
  • Formula compatible with the original manufacturer's additive (OEM).
  • Ensures a level of performance equivalent to the manufacturer's original additive (OEM).
  • Represents a more economical alternative to the original manufacturer (OEM).
  • Reduces carbon soot and particles.
  • Extends the lifetime of the diesel particle filter.
  • Reduces the saturation percentage of the DPF.
  • Maintains clean the diesel particle filter.
  • Allows passive regeneration at low temperature.
  • Ensures complete regeneration without saturation or failure.
  • Multiplies by 3 the performance of regeneration and depollution of the particulate filter.
  • Reduces maintenance costs.
  • Applicable to all diesel engines and fuels, in compliance with the latest emission regulations.

     

1st-gen.jpg  2nd-gen.jpg  3rd-gen.jpg

 

Instructions for use

 dpf.jpg

A : 1st generation tank          B : 2nd generation tank


Select the correct additive reference :

Confirm the colour of the snap-on connectors on the additive tank situated at the rear left of the vehicle. Confirm the additive reference according to the APV-PR, OPR or DAM number indicated on the front left door of the vehicle. It is imperative that you do not mix the different references, so follow the connections and compatibility guidelines. Preparation for filling: Wear protective gloves and glasses. Put the vehicle on a hydraulic ramp or above the pit. Disconnect the negative battery terminal and free up the opening to the additive tank situated at the rear of the vehicle, below the left side.

 WALKER-DPF-REGENERATION-ADDITIVES_Labels_2017_GB.jpg

Filling the additive tank :

  1. Connect the snap-on tube from the re-fill kit to the additive tank vent's snap-on connector. 
  2. Connect the kit's recovery tube to the additive tank's overflow opening and place an empty container (or bottle) below the tube to collect the surplus additive. 
  3. Position the container of additive on a raised support to fill the tank by gravity. 
  4. Once filled, reconnect the connectors and reset the computer. 
 

Download the 1st generation Safety Data Sheets.

Download the 2nd generation Safety Data Sheets.

Download the 3rd generation Safety Data Sheets.